You can easily connect wireless devices using the WPS button. For every other router, the location is the same for example, the WPS button on Netgear router ac is also located at the back. It is used for changing the network security settings; you can make the security password open for all using the WPS button.
The color of the button is usually blue, and it is located at the back of the router. If you press the button for longer, more than three seconds, then it will enable or disable the WPS.
You need to press accordingly as per the need of the situation. There are many possibilities, like you can easily establish a connection using WPS. After pushing the button, you just need to wait for a few seconds to get the connection done. You need to press the WPS button as per the requirements of your setting; if you want to turn off or ON the printer, then just press and release the button. If you want to disable or enable the WPS, then press the button for three seconds.
A long press of the WPS button generally results in such a scenario. After resetting, it will take a while to turn ON and connect to the network. Thank You Thank you for taking the time to respond. Rating Submitted Do you have a suggestion for improving this article? Characters Left : Submit Cancel. Get information, documentation, videos and more for your specific product. Ask the Community.
Need to Contact Support? See Support Options. Contact Support. Select a product or category below for specific instructions. N Routers. Nighthawk Routers. Although we refer to a Netgear router , our instructions will apply to any other model. The first thing that you will need to make sure of is that your router is turned on i.
You can check this easily by making sure that the power light is on. This light should not be flashing, it should be permanently on. If it is not, then check that the router is actually plugged in and if it is not, then plug it in.
The next thing you will need to do is to locate the WPS button at the back of your neck your router and press it. Then grab the computer or mobile device that you would like to connect through a WPS and activate this following the proper instruction on your device. How you would connect a computer or mobile device to the WPS network with different greatly so we cannot go to that in this article but you should find out easily elsewhere.
So, now that you know what that WPS is and how to turn it on, you may be wondering why on earth would you want to use it anymore circumstances. In the section of the article, this is what we will talk about it.
The first thing that you need to know is that it is not possible to use the WPS wireless connection under all conditions. There are certain conditions that need to be met beforehand. As we saw earlier The purpose of WPS is to allow wireless devices for example, a computer but also smart phone or any other Wi-Fi abled mobile device to connect to your Wi-Fi network in a faster and easier manner. Not all wireless networks will allow WPS , however, it is important that you check first if yours does.
If you turn the WPS button on then any wireless device within reach should be able to connect to your Wi-Fi network.
So you have to be very careful when and how to use this. Step 5: Therefore, all you need to take your mobile on the computer and connect to the WPS network. You can get the proper instructions on How to connect to WPS on the back of your router. Our Services are rated 1. We are not affiliated to any 3rd party brand unless specified. Call vendor for direct Support. Posted on 27 Mar Netgear Router Help.
Share this:. Is This Service Helpfull to You?
0コメント